Are there any large castings for wind turbine gearbox castings and are there any requirements?

- Nov 19, 2018-

The wind power gear box casting, that is, the wind power gear box, etc., is obtained by the casting process to obtain the finished product. Since the casting is obtained by casting, it is called a wind power gear box casting. For this kind of casting, it is necessary to have a deep understanding and comprehensive understanding, in order to achieve the correct and rational use of the product, and then to make full use of and avoid waste.


1. Are there many types of wind turbine gearbox castings?

From the current point of view, wind power gearbox castings are very many, because there are various types of wind power gearboxes, which can be summarized in the specific types, up to a hundred or so, and if there are special requirements It is also possible to customize the product to meet some special requirements and different user requirements, so as to ensure that the product can be used normally and has a good effect.


2. Is there a large casting in the wind turbine gearbox casting?

In the wind turbine gearbox castings, there are some large castings, such as the base or base, the box, the bearing housing and so on. These large castings need to control the production process and production quality during the casting process, so as to ensure the quality of the products and the normal use, and avoid various problems during the use of the castings.


3. Are there any requirements for wind turbine gearbox castings? What process is used for the external gear?

For wind turbine gearbox castings, from a professional point of view, there are some specific requirements. The main thing is to strictly control the production process and product quality of the castings, to ensure the quality of the products and to avoid problems in the process of use. In addition, there is a longer service life. The outer gear part is generally manufactured by carburizing and quenching.


4. Does the wind power gearbox ductile iron casting belong to the wind turbine gearbox casting? Does the wind turbine gearbox structure have an effect on the casting?

Wind power gearbox ductile iron castings, which belong to wind power gearbox castings, because this is a specific type of wind power gearbox castings, and in order to ensure the safe use of the gearboxes, ultrasonic testing of this castings is required to check whether the quality is Qualified and able to use normally.


The wind power gearbox structure generally has three structural stages: a two-stage planetary parallel axis, a first-order planetary two-stage parallel axis, and a closed differential plus parallel axis. The structural form adopted is determined by the use requirements. . Whether it has an impact on the wind turbine gearbox castings depends on the specific structural form and structural requirements, as well as the processing requirements of its various components.