Understanding of the positioning hole function and moving template of the Injection molding machine template casting

- Nov 07, 2018 -

Injection molding machine template casting, which is an important part of the injection molding machine, so you need to have a comprehensive understanding and understanding, in order to know what is the Injection molding machine template casting and how to use the product correctly and rationally, instead of using it incorrectly. Moreover, this can also make full use of the product and avoid waste.

 

1. What should be considered when purchasing the Injection molding machine template casting?

Injection molding machine template casting, in the purchase of the product, it is necessary to consider some specific aspects and factors, and there are some factors that must be considered, is the product origin, detailed parameters, real-time quotes and price quotes, product quality The six factors of after-sales service of manufacturers and products. In addition, if necessary, the product environment and use requirements should be considered in order to select the right product.

 

2. What is the moving template of the injection molding machine?

The moving template of the injection molding machine, which is a specific type of Injection molding machine template casting, is an important component including the template body. The part of the template body has the front and back sides, the back side is the mounting surface of the mold, and the front side is provided with two connecting rods for making and ejecting the cylinder supporting plate. The structural feature is that the two connecting rod supports, the ejection cylinder supporting plate and the template body are integrated into one integral casting piece. And this kind of template is better than the template of the separate structure in rigidity, and is not easily deformed when subjected to impact. In addition, it has the advantages of simple structure, few types of parts and convenient processing.

 

3. Injection molding machine T-slot, is it good for the Injection molding machine template casting?

In the injection molding machine, if it is fixed by a screw hole, the screw hole may wear out after a certain period of use, and then the new screw hole, screw and screw hole have to be replaced, and it takes time to replace the new component. It will affect the normal operation and working efficiency of the injection molding machine, and the use of the T-slot can effectively shorten the mold change time, and thus avoid affecting the normal operation and working efficiency of the injection molding machine.

 

4. What is the role of the positioning hole on the Injection molding machine template casting?

On the Injection molding machine template casting, it is provided with a positioning hole to ensure that the center line of the main channel of the injection mold coincides with the nozzle axis of the injection molding machine. In addition, in addition to the positioning holes, there is also a positioning ring. Between the two, H9/f9 is used. At the height of the positioning ring, the small mold is 8-10mm, and the large mold is 10-15mm. In addition, it should be noted that the total small mold has a positioning ring only on the fixed mold base plate, and the large template has a positioning ring on the fixed mold base plate.http://www.xihuafoundry.com/