Pipe End Connection And Sealing Structure Of Wind Power Flanges

- Apr 08, 2019 -

The wind power flanges is a part that is connected between the shaft and the shaft during the operation. It is mainly used for the connection between the pipe ends during use, and can also be used on the flange of the inlet and outlet of the equipment during operation. In use, it is mainly used for the connection between two devices, such as the reducer flange. A flange connection or a flange joint refers to a detachable connection in which a flange, a gasket and a bolt are connected to each other as a combined sealing structure.

The wind power flanges refers to the flange used for piping in the pipeline installation. It is used on the equipment to refer to the inlet and outlet flanges of the equipment. There are holes in the flange, and the bolts make the two flanges tightly connected. The flanges are sealed with gaskets. Flange threaded connection (threaded connection) flange, welded flange and clip flange. Flanges are used in pairs. Low-pressure pipes can be used with wire-bonded flanges, and welded flanges are used for pressures above four kilograms.

A gasket is placed between the wind power flanges, and then bolts can be used. The flanges of different pressures are different in thickness during operation, and the bolts used are different. Pumps and valves, when connected to the pipeline, the parts of these equipment are also made into the corresponding flange shape, also known as flange connection. Connection parts that are bolted at the same time around two planes are generally referred to as "flanges", such as the connection of ventilation ducts. Such parts may be referred to as "flange parts".

www.xihuafoundry.com